Our Bluetooth speakers need to be setup by pairing the device via bluetooth settings, as simple as 1,2,3. Within your devices settings, turn on Bluetooth, wait for few seconds to search for devices. LitheAudio BT2 shall appear, click to connect, a password prompt shall come up, enter default 0000 or No PIN, next, All done. Its as simple as that...

The speaker requires NO additional amplifiers, router, controllers, mainframes, all you need is within the box. Saving you space and money, Just connect power..

Yes our bathroom rated version LBT2/IP is IP44 rated for bathroom use. Do not place speaker directly above shower unit, bath, sinks or radiators.

Yes, you can connect the power supply via the supplied plug into a main socket OR connect to lighting circuit either existing ceiling rose or junction box by wiring in a single plug socket or terminating the plug to a fused spur, with an 3A rated fuse. (Make sure that the live is not connected to the switched Live otherwise the speakers will only become active when switching on lights) All electrical wiring must be done by a qualified electrician or similarly qualified person. Instructions enclosed within the box advise how to fit the speaker, if unsure seek a qualified electrician to avoid damage to the product and for your safety.

Yes, the new V5.0 version is backwards compatible, just without the additional benefits of extended range. low latency, HD sound. It shall perform to the same standard as the previous model.