Home > All Products
This adjustable hole saw from Lithe Audio is designed to make mess-free, accurate and fast circular holes for ceiling speakers (as well as downlight fittings).
For cutting aluminium, iron, plastic & wood.
Used for the cutting of wood and plastics.
Tightening and securing parts.
Used for adjusting the cutting blade holders.
Use to drill hole through remaining thickness.
Making the installment safer and dust-free.
This tool is capable of cutting round holes of 40mm - 300mm diameter with a max. cutting depth of cut - 30mm (max. 1mm in metal).
Using the Allen Key supplied, adjust the cutting blade holders so that the cutting blades are at the desired diameter. The inner edge of the holders should line up with the appropriate graduation on the arm. It is important to note the orientation of the cutting blades - ensure they are correct. Follow our step-by-step guide in the instruction manual if you find yourself struggling.
Please see below most commonly asked questions, any further answers can be found within support
Our Bluetooth speakers need to be setup by pairing the device via bluetooth settings, as simple as 1,2,3. Within your devices settings, turn on Bluetooth, wait for few seconds to search for devices. LitheAudio GS shall appear, click to connect, a password prompt shall come up, enter pin number, next, All done. Its as simple as that...
The speaker requires NO additional amplifiers, router, controllers, mainframes, all you need is within the box. Saving you space and money, Just connect power..
Yes our rock speaker is IP56 rated, so can be left outdoors. We recommend in the winter months to put away in the garage.
Yes, just connect the power supply via the supplied plug into a outdoor socket, as simple as that
Unfortunately not, however due to being outdoors with no restrictions the wireless range far exceeds 10m.
Call us: +44 (0)1293 922 015